Ferrous inclusion detection: A specially designed FERROCHEK module detects ferrous inclusions in the copper
Rolling defect detection: Simultaneous identification of laps, cracks, etc.
Eddy current probe: Encircling coil with magnets for ferrous inclusion testing
Production: Copper rod in continuous casting lines
common problem in the production of copper rod is the presence of ferrous inclusions. The FERROCHEK eddy current inspection system by PRÜFTECHNIK detects ferrous inclusions down to 0.02 mg in size. Using an encircling coil with special magnets, the equipment simultaneously identifies both ferrous inclusions as well as rolling defects. The system consists of the encircling coil and the EDDYCHEK 5 inspection unit that includes the FERROCHEK module for ferrous inclusions and a normal differential module for rolling defects. It can be connected to a PC for complete documentation of test results.
Eddy current technology can be used to detect splices, connecting wedges or joint inside coated material such as steel tubes with PVC insulation. In this example, an EDDYSENSOR and an e
Butt welds cannot be identified by simple detectors such as the light barrier or proximity switch. The EDDYSENSOR locates the butt weld using eddy current t
